Welcome, Log in
The S1560 underwater light can be remote controlled, high powered, multi-color underwater flood lights, illuminating a wide area from your vessel. Solid and flashing color output.
Please note: You will need to buy the S1560 DMX controller to control up to 4 (four) S1560 lights.
The Abyss S1560 is our most exciting underwater light, capable of producing up to sixteen colors and a variety of lighting patterns. Its powerful light output is customizable via a wireless remote control (via S1560 DMX Controller sold separetely). For more information about available output, please view the S1560 operating instructions.
Please note: You will need to buy the S1560 DMX controller to control up to 4 (four) S1560 lights.
Whether you're looking to attract fish or just improve the ambiance, our underwater lights represent the best value in the industry. We've been designing, assembling, distributing, and servicing our popular line of marine lighting in the United States for over five years and have built an excellent reputation for quality and service.
State-of-the-Art LED Technology
All of the Abyss Technology lighting products feature state-of-the-art light emitting diode (LED) technology. LED technology ensures longevity (over 35,000 hours of operation), safety, and efficiency.
The exceptionally low electrical power requirement of our LED technology reduces battery drainage, allowing the light to remain on for a longer period of time, even with the boat’s engines off.
The S1560 produces a large light output despite its low profile, measuring only 11/16” thick (see Data Sheet tab for specs). To aid in its cooling while lit, we've designed it with a pass-through cooling system that allows water to surround it on 360 degrees, keeping the light cool and efficient.
Construction and Installation
The S1560 is constructed from marine grade bronze with an impact resistant tempered glass lens. Carefully assembled and permanently sealed, our underwater lights are submersible, suitable for both salt water and fresh water usage.
Because of its flush-mounted design, installation only requires a tiny 3/16" hole in your transom. Many competing lights require a large (several inch diameter) hole for mounting, creating potential structural strength, leakage, and other concerns.
Installation of the S1560 is easy; simply pass the supply wire through a tiny 3/16” hole in the transom and route it to a power source. Apply marine grade sealant to the hole (as well as the mounting holes) and fasten the light to your boat using the included stainless steel screws.
Our LED boat lights are equipped with five feet of electrical wire. The S1560 is supplied with an external voltage regulator to protect the lights from all types of battery voltage fluctuations.
We are an original equipment supplier to several major brand name boat builders and have built a reputation for quality, reliability, value, and excellent service.
Non-Marine Applications
Fully submersible, underwater boat lights have been popular with boaters for many years as a way to illuminate the water around their watercraft. Our LED lights are also an excellent choice for docks, ponds, fountains, or any other underwater lighting application.
Switches
We sell marine light switches that are suitable for installation with the S1560. Light switches should be selected such that the maximum current rating of the switch exceeds the total current draw of the connected lights. The S1560 draws approximately 3 amps, so we recommend selecting a marine light switch as follows:
1 S1560 light: SW6 switch
2 or 3 S1560 lights: SW10 switch
4 S1560 lights: SW15 switch
5 or more lights: additional switches required
| From | Title | Comment |
|---|---|---|
| 2011-02-21 Jasper S. | Very happy with these lights. | Very high quality lights. Powerful when used in white mode. Different colors don't produce the same intensity as the white, but project excellent mood light on the back of boat. |
Only registered users can post a new comment.
